Products Available From Spectrum Control
Amplifier
Our standard and custom designed high reliability products are designed to address the most challenging current and emerging military and commercial requirements.
Attenuator
Coaxial attenuators, terminations, gain equalizers, bias tees, DC blocks, connectors, high-rel attenuators, and more. Custom designs available.
Bandpass Filters
Available topologies: Tubular, Lumped Element, Cavity, Ceramic, Waveguide, Suspended Substrate, SAW.
Board Mount EMI Filter
EMI filters that mount on a PCB. Types include solder-in, surface mount, and current sense transformers.
Cavity Filters
Spectrum Control has built its reputation on designing and delivering the most challenging RF filters in the industry. That is why so many RF engineers trust their filter needs to us.
Ceramic Filters
Spectrum Control has built its reputation on designing and delivering the most challenging RF filters in the industry. That is why so many RF engineers trust their filter needs to us.
Chassis Mount EMI Filter
EMI filter designs for single phase, 3 phase, or DC power applications filter the AC or DC power entering your system.
DC Blocks
Spectrum Control DC Blocks are coaxial components that prevent the flow of direct current (DC) frequencies while offering minimum interference to RF signals. DC Blocks are available in Inner Only, Outer Only and Inner / Outer designs.
Delay Lines
Delay lines are devices used to slow down a signal by a time interval in an electrical network. There are two basic delay line technologies: passive and active.
Detector
Spectrum Control produces temperature compensated detectors, which operate from 10 MHz to 2 GHz. Analog / Level Detectors convert a range of RF input powers (typically from -20 dBm to +10 dBm) to a corresponding DC output voltage level.
Digitally Tuned Oscillators
Spectrum Control offers a complete line of Digitally Tuned Oscillators (DTOs).
Diode Driver
Spectrum Control offers a complete line-up of PIN Diode Switch Drivers with output current capability of 10 mA to 50 mA and switching speeds as fast as 6 ns.
Diplexer
Lowpass, Highpass and Bandpass filters can be combined to form our state-of-the-art Diplexers, Triplexers and Multiplexers. Spectrum Control utilizes Suspended Substrate, Lumped Element, Ceramic, Waveguide, and Cavity filters in our Multiplexer (MUX) designs.
EMI Protection
Electromagnetic Interference (EMI) can affect your electronic system in many ways. Outside in. System out. Get solutions to address your system’s mechanical, electrical, and environmental concerns.
Filter
A wide range of filters are available to fit your needs. From high power saw filters, bandpass filters, wireless telecom, highpass and lowpass filters, space applications, and more.
Frequency Multiplier
The Frequency Multiplier Oscillator (FMO) is a compact 21 channel synthesized signal generator that provides transmit and LO signals for L-band and S-Band airborne radar systems.
Frequency Sources
Spectrum Control offers an extensive design library of low phase noise sources, optimizing your overall design for superior performance and value.
Frequency Synthesizers
Spectrum Control’s synthesizers offer wide bandwidth, multiple step size options, fast switching speed, and low phase noise control options.
Limiter
Wide range of high power products covering a range of frequencies C, S, X, Ka and J-band in various package styles drop-in, coaxial and waveguide.
LNA
The highest performance, lowest noise amplifiers the industry has to offer. We have multiple product solutions, ranging from discrete transistors, packaged MMIC solutions incorporating internal matching and on-chip linearization, and dual amplifiers for use as push-pull or balanced amplifier configurations.
Low Phase Noise Amplifier
Guaranteed ultra low phase noise performance in the Series PM Amplifiers line using a combination of design techniques, material selection, and in-house testing.
Lowpass Filters
Available topologies: Tubular, Lumped Element, Suspended Substrate.
Multiplexer
Lowpass, Highpass and Bandpass filters can be combined to form our state-of-the-art Diplexers, Triplexers and Multiplexers. Spectrum Control utilizes Suspended Substrate, Lumped Element, Ceramic, Waveguide, and Cavity filters in our Multiplexer (MUX) designs.
Optical Converters
Each individual channel up to 10Gbps. Wide operating temperature range -55⁰C / +95⁰C.
Optical Transceivers
Each harsh environment optical transceivers individual channels are up to 12.5Gbps. Wide operating temperature range -50⁰C / +100⁰C. Micro 25 x 25mm footprint.
Panel Mount EMI Filter
Bulkhead / panel mount EMI filter designs provide superior high-frequency insertion loss and are built following MIL-PRF-15733 or MIL-PRF-28861.
Phase Shifters
Our complete line of programmable phase shifters and electromechanical RF phase shifters. Products ranging from DC-40 GHz and are suitable for commercial, military and higher performance applications.
PLO
Multiplied PLOs also offer flexibility in the desired frequency generation output by utilizing a series of x2 multipliers. With an output range of 80 to 1600 MHz, these passive multiplier designs can be configured for most military airborne and ground based applications.
Power Amplifier
Power amplifier (PA) solutions for different frequency and power levels. Our PAs support demanding system requirements for mobile applications, commercial infrastructure and a variety of military and space systems.
Programmable Step Attenuator
From Spectrum Control’s Weinschel brand. Programmable attenuators including solid state programmable attenuators, electromechanical programmable attenuators, and multi-channel attenuator systems. High Attenuation Ranges with low step resolutions.
Resistive Power Splitters / Dividers
Spectrum Control Power Dividers are designed with high isolation and exceptional phase balance in mind. Our Wilkinson style power dividers yield superior isolation between the output ports. Stripline and microstrip styles can be produced without the high cost of lumped inductors or capacitive elements.
Resistor
Spectrum Control makes chip, flange, rod, and thin film resistors.
SAW Filters
Spectrum Control’s SAW Filters have frequencies from 20 MHz to 2600 MHz with exceptional low loss performance of less than 2 dB and fractional bandwidths from 0.04 to 60%.
Suspended Substrate Filters
Spectrum Control has built its reputation on designing and delivering the most challenging RF filters in the industry. That is why so many RF engineers trust their filter needs to us.
Switch Filter
Spectrum Control leverages its advanced RF & Microwave filter technologies to build high performance Filter Assemblies for military & commercial applications.
Switches
Spectrum Control designs a large selection of broadband, high isolation switches including PIN diode and high speed GaAs designs in frequencies up to 22 GHz.
Termination
Terminations up to 50 GHz. Spectrum Control makes coaxial terminations with a wide selection for frequency type, power handling, and connector type. Custom designs available.
Triplexers
Available toplogies: Lumped Element, Cavity, Ceramic, Waveguide, and Suspended Substrate.
Tubular Filters
Spectrum Control has built its reputation on designing and delivering the most challenging RF filters in the industry. That is why so many RF engineers trust their filter needs to us.
Ultra-Low Phase Noise SAW Oscillator
SAW Oscillators feature low phase noise, excellent frequency stability for applications that demand high-performance and high-reliability. Frequencies from 100 MHz to 4000 MHz.
Waveguide Filters
Spectrum Control has built its reputation on designing and delivering the most challenging RF filters in the industry. That is why so many RF engineers trust their filter needs to us.
